Pool maintenance schedule – How to keep your pool in perfect condition

Daily Tasks

1. Remove Debris: Use a net to remove leaves, insects, and other debris that may have accumulated on the water surface.
2. Check Water Level: Ensure the water level is high enough for the skimmer to work effectively. Too low water level can affect water flow and cause problems with the pool pump.
3. Test pH Level: Keep the pH level between 7.2 and 7.6 to avoid irritated eyes and optimize chlorine effectiveness. A balanced pH ensures chemicals work properly and prevents damage to pool equipment.

Weekly Tasks

1. Vacuum Pool Bottom: Use a pool vacuum to clean the bottom from sand, gravel, and other dirt. If you have an automatic vacuum, this can be done more often.
2. Test Chlorine and Alkalinity Levels: Chlorine levels should be between 1 and 3 ppm, and alkalinity between 80 and 120 ppm. These levels help keep the water clean and prevent the growth of bacteria and algae.
3. Add Algaecide: To prevent algae growth, you can add algaecide. This is especially important during warm periods when algae grow faster.
4. Clean Pool Filter: If the pool filter is dirty or clogged, it can affect circulation. Clean the sand, cartridge, or DE filter according to the manufacturer's instructions, usually once a week or when pressure increases.

Monthly Tasks

1. Adjust Calcium Hardness and Cyanuric Acid: Calcium hardness should be between 200 and 400 ppm to prevent damage to the pool's surface. Cyanuric acid, or stabilizer, helps protect chlorine from being broken down by sunlight. The level should be between 30 and 50 ppm.
2. Inspect Equipment: Check the pool pump, filter, and heater for signs of wear or leaks. This can extend equipment lifespan and prevent major repairs.

Seasonal Tasks

1. Pool Opening and Closing: At seasonal opening, make sure the pool is thoroughly cleaned and refill with fresh water if needed. At closing, ensure all pipes and pumps are properly drained to avoid freeze damage.
2. Replace Filter Media: Replace sand or DE powder in the filter after the recommended time (usually every two or three years) to maintain effective filtration.

Summary

With this pool maintenance schedule, you have a clear structure to keep the pool in optimal condition. By following daily, weekly, monthly, and seasonal routines, you can ensure the pool water is clean, healthy, and always ready for a refreshing swim!