Sådan tømmer du en nedgravet pool (sikkert og effektivt)

Mark Toth

Owning an inground pool comes with responsibility, and an important task is to drain your pool when necessary. Whether you are preparing for winter closure, performing maintenance, or dealing with water quality issues, it is crucial to drain your inground pool correctly. In this comprehensive guide, we will walk you through the step-by-step process to ensure a safe and effective draining experience.

Reasons to Drain an Inground Pool

Before diving into the draining process, it is important to understand why you might need to drain your inground pool. Common reasons include:

  • Winterizing: Partial draining of your pool is an important step in winter preparation. This prevents the water from freezing and potentially damaging the pool structure and equipment.

  • Cleaning and Maintenance: Over time, dirt, minerals, and contaminants can accumulate in the water. Draining the pool allows for a thorough cleaning and maintenance process.

  • Adjusting Water Chemistry: If the water chemistry is unbalanced, draining and refilling the pool can help achieve the desired chemical levels.

  • Repair or Replacement of Pool Equipment: When repairing or replacing pool equipment, it is often necessary to drain the pool to access and work on various components.

Check Local Regulations

Before starting the draining process, contact local authorities to ensure you comply with any regulations regarding pool drainage. Some areas have specific guidelines to prevent water waste and environmental impact.

Gather Necessary Equipment

To effectively drain your inground pool, gather the following equipment:

  • Submersible Pump: A submersible pump is a powerful tool designed to quickly drain large amounts of water.

  • Hose: Connect a hose to the pump to direct the water to an appropriate drainage location.

  • Garden Hose or Backwash Hose: Depending on your pool's plumbing, you may need a garden hose or backwash hose to assist with the draining process.

  • Safety Equipment: Use appropriate safety gear, including gloves and safety goggles, to protect yourself during the process.

Plan the Drainage Path

Determine the discharge path for the pumped water. Avoid areas that could cause erosion, damage landscaping, or flood neighboring properties. Ensure the water flows away from the house foundation.

Partial Draining vs. Full Draining

Consider whether you need to partially or fully drain the pool, depending on the purpose of the drain. For winterizing or routine maintenance, partial draining is usually sufficient. Full draining is typically used for more extensive repairs or renovations.

Draining Process

Follow these steps for a safe and effective draining process:

  • Turn Off Power: Turn off the pool pump and all related power sources before starting the draining process.

  • Locate Drain Plugs: Identify and remove any drain plugs in your pool equipment, including pump, filter, and heater. This ensures water drains from all components.

  • Connect the Submersible Pump: Lower the pump into the deep end of the pool, and connect the hose to the pump outlet.

  • Direct Water Flow: Position the hose so the water is directed away from the pool and toward the designated drainage area.

  • Start the Pump: Turn on the submersible pump to begin the draining process. Monitor the water level and adjust the hose as needed.

  • Monitor Water Level: Check the water level regularly to avoid draining too much water, especially in areas with a high water table.

  • Refill as Needed: If you are only partially draining the pool, periodically pause the pump and refill the pool with fresh water to maintain a safe water level.

Final Steps

Once the desired water level is reached:

  • Turn Off the Pump: Turn off the submersible pump and disconnect it from the power source.

  • Replace Drain Plugs: Reinstall all drain plugs that were removed from the pool equipment.

  • Refill the Pool: If you partially drained the pool, refill it with fresh water to the appropriate level.

  • Balance Water Chemistry: Test and adjust the water chemistry as needed to ensure a healthy and balanced pool environment.

Conclusion

Properly draining an inground pool is a necessary task for pool owners, whether for maintenance, repairs, or winterizing. By following this comprehensive guide, you can safely and effectively navigate the process and ensure the longevity and optimal performance of your inground pool. Remember to consult local regulations, use the right equipment, and prioritize environmental considerations throughout the draining process.

Back to blog

Leave a comment